HYT TC-700 Ex PLUS, Service Manual

Page: 7 / 85

TC-700 EX PLUS Service Manual
6
Target radio 1) LED solidly glows green
when cloning is in
progress;
2) LED flashes green and
radio sounds beep tone,
when cloning is
completed;
3) LED flashes red when
cloning fails.
Power On The green LED flashes once.
Low Battery Alert LED flashes red, and radio
sounds three beeps every 30
seconds.
Transmitting LED glows red
Receiving LED glows green when
carrier is present.
Scanning Green LED flashes once
every 1 second.
Programming Reading: LED glows red;
Writing: LED glows green.
Encoding (DTMF/PTT ID/2-Tone (5-Tone)/HDC1200/HDC2400
TM
) 1) LED glows red while
transmitting;
2) LED glows orange when
transmission ends.
Decoding (2-Tone (5-Tone)/HDC1200//HDC2400
TM
) Orange LED flashes after the
signalling is successfully
decoded.
Select Power Level 0.5W: One beep is heard;
1.5W: Two beeps are heard;
3W: Three beeps are heard.