the following events happen:
◇
Orange LED flashes in standby mode; green LED glows in receive mode; red LED glows in
transmit mode.
◇
If Tone for TTS has been programmed, an alert tone will sound when the correct tones are
received.
◇
If Tanspond for TTS has been programmed, a tone for acknowledgement will be returned to the
caller.
◇
Press MONI key again to close the squelch, the speaker is muted.
Transmit
◇
Holding down PTT and MONI keys simultaneously will transmit preset tones .
◇
Red LED solidly glows in transmitting.
◇
The radio will keep transmitting until the tones are completely sent. When the tones are sent, the
squelch is opened, and now, if no signal is received, orange LED will flash.
◇
Pressing MONI key again will close the squelch, and the speaker is muted.
Channel Scan (This feature is programmed by your dealer)
Turn Channel selector to the position “S”, the radio will automatically detect those channels which
have been programmed as scan items in channel 1-15 (your dealer can set any channel as scan item or
non-scan item). When any activity is detected on one channel, the radio will stop on the active channel
for communications.
Priority channel scan
Any programmed channel may be set as the priority channel. The radio will detect the priority channel
periodically while stopping on a non-priority channel. When there is any activity on the priority
channel, the radio will turn to the priority channel for communications.
Scan Revert channel
The Scan Revert Channel feature sends you to the right channel while initiating a call during channel
scan. Press [PTT], the radio stops scanning and transmits on the revert channel.
Revert channel can be programmed by your dealer.
Busy Channel Lockout
If the channel you choose is set by your dealer as "busy channel lockout", and this channel is being
used by other users, press PTT, the radio generates a beep and will not transmit the signal. To stop the
beep, release PTT. When this channel is free, press PTT to transmit.
Optional Accessories
TB-82A: Ni-Cd battery (7.2V/800mAH)
TB-89: Ni-MH battery (7.2V/1500mAH)
TB-72A: Ni-Cd battery (7.2V 800mAH)
TB-75: Ni-MH battery (7.2V 1100mAH)
TB-76: Ni-MH battery (7.2V 1500mAH)
TB-86: Ni-MH battery (7.2V 1100mAH)
TDC-28: Rapid Charger
TDC-29: Standard Charger
PDS-237A: AC Adapter (standard charger)
PDS-237L: AC Adapter (rapid charger)
TC-368S Leather Case
Short Antenna:
TC-268S (1) 136-150MHz Antenna mark is shamrock.
TC-268S (2) 150-174MHz Antenna mark is grass green.
TC-368S (1) 400-420MHz Antenna mark is dark red.
Summary of Contents for TC-268S
Page 9: ......
