C
PRECaUTIONS fOR USE
PRECaUTIONS fOR USE
Your HYT watch is set and ready to be worn.
The meniscus
1
in the capillary
3
displays the time continuously while the watch is on your
wrist, even if you wear it in extreme temperatures (0°C to +50°C).
Important :
If you plan to not wear the watch for
a while, the coloured liquid has to be stored in its
own reservoir (on the left bellows
2
).
To do this, unscrew the crown and pull it out to
position C (time setting). Allow the coloured liquid
to move into “Zone II” until it starts its retrograde
(ensure the time needed for this movement is
respected). Once the retrograde phase is complete
(coloured liquid in “Zone I”), ensure that the crown
remains in the time setting position C. Your watch
is now ready to be stopped for an extended period.
The capillary
3
is then filled with transparent
liquid (it is possible to still see some coloured
liquid in “Zone I”).
Produced and tested to very stringent criteria, the constituent components of your HYT
watch together form an exceptionally water resistant unit (to a depth of 50 metres).
To ensure these qualities are preserved, we recommend that you replace the gaskets
every 3 years. Temperature variations, moisture, perspiration or repeated impacts may
adversely affect its water resistance over the years.
With its water resistant case, your HYT watch is fully washable. It should be cleaned
regularly in lukewarm, soapy water, rinsed and then carefully dried with a soft cloth. After
exposure to sea water, rinse your HYT watch in fresh water.
Storage
Zone I
Zone II
4
HYT
WATCHES - KAIROS TECHNOLOG
Y
SWITZERLAND
(KTS)
SA - Rue de PRébARReAu 17
-
2000 NeucHâTel - SwiTzeRlANd - www.HYTwATcHeS.com
