Steering Pump and Motor Assembly
1600 SRM 974
WARNING
If the hoses are incorrectly connected, the
disk will move rapidly with high force when
the truck is started. Do not place the hands
near the disk when starting the lift truck after
connecting the pump.
7.
Check the hydraulic level of the hydraulic tank.
Test operate the steering pump. Connect the bat-
tery. Check for leaks. Install the instrument
panel cover. Remove the blocks from both sides
of the drive/steer tire, caster wheels, and the load
wheels.
PUMP
Remove
1.
Disconnect the battery.
Block the drive tire,
caster wheels, and load wheels on both sides to
prevent movement of the lift truck.
2.
Install labels on the hydraulic lines for proper in-
stallation at assembly. Disconnect the hydraulic
lines and install caps on the lines and fittings.
3.
Remove the two capscrews and lockwashers re-
taining the steering pump to the motor. Remove
the pump from the motor. See Figure 8.
1.
CAPSCREW
2.
O-RING
3.
FITTING
4.
ELBOW
5.
ELBOW
6.
ELBOW
7.
PUMP
8.
MOTOR
Figure 8. Power Steering Pump and Motor
10