Hyster J30XNT, Operating Manual

Page: 13 / 226

Model Description
General
This series of electric lift trucks is available in the following
models: (see
Figure 1 ).
J30XNT, J35XNT, and J40XNT (K160)
The lift trucks covered in this Operating Manual are equip-
ped with solid rubber tires that look like pneumatic tires.
See
Wheels and Tires in the Maintenance Section for a
description of these tires.
The operation of the lift truck is the same for all models. A
battery supplies power for the traction motors, hydraulic
pump motor, control panel, and display panel.
The lift trucks covered in this Operating Manual are manu-
factured with three motors: two traction motors and a
hydraulic pump motor. See
Figure 2 and Figure 3 .
The motors use AC motor and control technology. The trac-
tion motors are mounted between the left and right trans-
missions on the drive axle. The hydraulic pump motor is
mounted behind the driver and in front of the counter-
weight. See
Figure 2 and Figure 3 .
In addition to dual, hydraulically-operated, wet disc service
brakes and electrically-operated disc parking brake, the lift
trucks covered in this
Operating Manual are equipped with
electric braking (plugging) and an auto brake feature. When
the lift truck is traveling in one direction and the direction
control switch or MONOTROL® pedal is changed to the
opposite direction, the plugging function is energized.
Auto regenerative braking allows the user to set the dis-
tance the truck will coast when the direction control switch
is returned to the
NEUTRAL position or when the MONO-
TROL® or accelerator pedal is released.
Model Description
11
Property of American Airlines