600 SRM 496
Cylinder Head, Camshaft, and Valve Mechanism Repair
1.
FRONT HOUSING
2.
GASKET
3.
OIL SEAL
Figure 4. Front Housing
12. Remove valve cover.
13. Loosen capscrews for rocker shaft supports in
proper sequence. See Figure 5. Remove rocker
shaft assembly and camshaft.
Figure 5. Rocker Assembly Removal Sequence
14. Remove capscrews for cylinder head in proper se-
quence. See Figure 6.
15. Lift cylinder head from the block.
Figure 6. Cylinder Head Removal Sequence
16. Use valve spring compressor to remove valve re-
tainers, springs, and valves from head. See Fig-
ure 7.
Figure 7. Valve Removal
CLEAN
WARNING
Cleaning solvents can be flammable and toxic
and can cause skin irritation.
When using
cleaning solvents, always follow the solvent
manufacturer’s recommended safety proce-
dures.
Clean all parts in solvent. Make sure all oil passages
are clean and all machined surfaces are smooth.
3
