Brake Shoe Installation
1800 SRM 535
1.
ARM CAM WELDMENT
2.
COTTER PIN
3.
FLAT WASHER
4.
NUT
5.
LOCKWASHER
6.
ADJUSTING NUT
7.
LUBE FITTING
8.
SNAP RING
9.
CAPSCREW
10. LOCKWASHER
11. SUPPORT WELDMENT
12. BUSHING
13. CENTERING SHAFT
14. NUT
15. NUT
16. BRAKE SHAFT
17. UPPER ADJUSTING SCREW
18. SPRING
19. LOWER ADJUSTING SCREW
20. SETSCREW SEAT
21. SETSCREW
22. BRAKE SHOE W/LINING
23. PIVOT PIN
Figure 5. Brake Shoe Assembly (CA60-80XT/XT2, T5XT)
Brake Shoe Installation
W/B60-80XT, W20-40XTA, W20-40XTC,
W20-30XTR
See Figure 2 for the B60-80XT and Figure 3 for
the W20-40XTA, W20-40XTC, W20-30XTR, and
W60-80XT.
1.
Assemble the setscrew seat and setscrew in the
brake shoe and lining assembly. Do not tighten
the setscrew completely. Install the adjusting
screws into the brake shoe.
Refer to Brake
Adjustment, W/B60-80XT before tightening the
setscrews.
2.
Insert the spring retainer bolt through the brake
shoes and adjusting screws. Install the spring
seats, spring, and nuts on the retainer bolt.
3.
Position the brake shoe and lining assemblies
on the pivot pins and between the brake release
arm.
4.
Install the pivot pin link on the pivot pins and
install the snap rings. Refer to WARNINGS in
Repairs - General. Assemble the grease fittings
into the pivot pins. Grease the pivot pins.
6
