Transmission Repair
1300 SRM 1444
CAUTION
Do not drop the capscrews into the converter
housing. They will be difficult to retrieve.
NOTE:
You must turn the flywheel to gain access to
each capscrew.
22. Remove the eight capscrews retaining the drive
plate to the flywheel.
23. Raise the lifting device to hold the weight of
the transmission only.
Remove all fasteners
between the torque converter housing to the
flywheel housing.
24. Make sure that all connections have been re-
moved.
WARNING
The transmission is heavy. Make sure that the
lifting devices are properly positioned.
CAUTION
Keep the transmission level when the transmis-
sion is separated from the engine so the drive
plate is not damaged.
25. To avoid damage to the drive plate, carefully lift
the transmission assembly past the crossmember
support.
26. Carefully lower the transmission on the ground.
DISASSEMBLE
Figure 1 shows the front view of the TE17 transmis-
sion.
Figure 1. TE17 Transmission
Transmission Case
STEP 1.
Remove the engine speed and temperature sensor
and the drum speed sensor from the transmission
case.
1.
ENGINE SPEED AND TEMPERATURE SENSOR
2.
DRUM SPEED SENSOR
2
