5/11 Rev. B
Form L-1530
Turbo Stream
®
Installation, Operation, Repair and Parts Manual
Description
The Hypro High Pressure System is a gas motor-driven,
flow-based proportioning system that injects foam concen-
trate at a desired percentage at a fixed water flow rate. The
basic Hypro High Pressure System is shown below. The
system will accurately deliver from 0.3% to 3.0% foam con-
centrate at the rated system pressure and flow rate. The
system will accurately inject foam concentrate while the
system is running at recommended operating speed and
pressure. Foam percentage indication is instantaneously
given on the foam monitoring panel supplied.
The foam concentrate is directly injected into the system at
the head of the pump. It is then fed as foam solution into
the adjustable foam spray gun.
The pump inlet is equipped with a check valve to prevent
contamination of the water supply.
The Hypro High Pressure Foam System is designed for
Class A foam concentrate (per NFPA 1150) applications
and calibrated for viscosity ranges up to 60 CPS.
Model No. 1508B-130EFS
Summary of Contents for Turbo Stream 1508B-130EFS
Page 11: ...11 Notes L 1530 5 11 Rev B...