background image

3

FusionAmp, an introduction

Thank  you  for  purchasing  the  new  Hypex  Plate 
Amplifier, powered by our NCORE technology.

This FusionAmp will be the basis of a powerful active 
subwoofer, a two-way or a three-way monitor.
The  FusionAmp  family  consists  of  the  following 
models:

FusionAmp One-Way  models:

       FA251

,   1x250W

       FA501

,   1x500W

FusionAmp Two-Way models:

       FA122

,   2x125W

       FA252

,   2x250W

       FA502

,   2x500W

FusionAmp Three-Way models:

       FA123

,    100W Tweeter

       FA253

,    100W Tweeter

       FA503

,    100W Tweeter

RTFM (Read This Fine Manual)

Please read the safety instructions on the next page 
before installing and/or operating the module.

Please note the different models. This guide describes 
the one-way and multi-way models. In addition to the 
analogue  inputs,  the  one-way  models  have  a  high 
level analogue input, whereas the multi-way models 
have a digital input instead.

This user’s guide covers the general user instructions 
for these models. For detailed 3D CAD models, please 
refer to our website. In addition to the 3D CAD, files we 
have 2D drawings and  an FAQ section, with a  lot of 
additional support material.

Included in the box

       

The FusionAmp

       

This user guide

       

Speaker connection cable(s)

One-Way models:

       

4 way, pluggable terminal block, 5.08 mm

Default filter

To  protect  your  valuable  drivers,  the  DSP  does  not 
contain a filter out of the box. One must first configure 
a filter before the FusionAmp gives an output signal. 
See chapter HFD.

Table of Contents

Chapter

Page

Introduction, Table of contents

3

Safety precautions

4

Getting started

5

Fusion Accessories

5

Features

6-7

Using the remote (optional)

8

Example applications 

8-9

Connections one-way models

10

Connections multi-way models

11

Installation

12-13

Connecting the speakers

14

System information

16

Advanced system information

17

Troubleshooting

18

Frequently asked questions

18

Support

18

Warranty

19

Disclaimer

19

Revisions

19

Notes

19

Hi there!

This user guide is preliminary, so things might 

change, disappear, be added or whatever. 

No rights can be derived from this information.

If you have questions, remarks or feedback, 

please direct them to: [email protected]

Summary of Contents for FusionAmp FA122





















Reviews: