DS1.2
- 6 -
Crossover settings
Crossover example 1.
Crossover frequency is set to 50Hz.
Crossover example 2
.
Crossover frequency is set to 150Hz.
DS1.2
- 3 -
CAUTION
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: SHOCK HAZARD.
AVIS: RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR.
CAUTION: REPLACE FUSE WITH SAME TYPE AND RATING.
ATTENTION: UTILISER UN FUSIBLE DE RECHANGE DE MÊME TYPE.
DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE.
ATTENTION: DEBRANCHER AVANT DE REMPLACER LE FUSIBLE.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
GENERAL SAFETY INSTRUCTIONS
1.
Read instructions. Read the safety and operating instructions before operating the
appliance.
2.
Retain instructions. Retain the safety and operating instructions for future reference.
3.
Water and moisture. Do not use the appliance near water, for example near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool and
the like.
4.
Heat. Site the appliance away from heat sources such as radiators, heaters, stoves, or
other appliances that produce heat.
5.
Power cord protection. Route power cords so that they are not likely to be walked on
or pinched by items placed upon or against them, paying particular attention to cords
at plugs, power sockets, and at the point where they exit from the appliance.
6.
Unplug this apparatus during lightning storms or when unused for long periods of
time.
7.
Objects and liquid entry. Take care not to let objects or liquids fall into the product.
8.
The product should be serviced by qualified personnel only.
REPLACING THE FUSE
Should the mains fuse blow, replace it only with an equivalent part. The fuse holder is located
just below the mains inlet socket. To replace the fuse, disconnect the product from the mains
supply. Using a flat blade screwdriver remove and replace the fuse. Contact your local retailer.
