32
© Copyright 2021 HYPERVSN. All rights reserved
11.
CONTENT PLAYBACK CONTROL
1.
Go to the “Player” page.
Picture 44. Player page for the MasterBox with the connected Devices
If media content is already uploaded onto the Device/the Wall Devices, after the Wall
Devices are turned on, content will start to be displayed. If this content contains
soundtracks and if audio facilities are connected to the MasterBox and powered, the
audio content output will be provided while the Devices are displaying videos.
Note.
Before media content starts to be displayed, it takes some time for the Devices for
booting and synchronization. The time depends on the number of the Devices that the
Wall consists of.
If there isn’t any content
uploaded onto the Devices, one of the starting media
animations will be displayed (Picture 11).
Attention
. To display media content, the Wall Devices must be in the Operating mode.
2.
Ensure the “Wall Status” indicator has the “Ready to play” status (
If the “Devices issue” status
is being displayed, click
Check Devices
to determine
the cause of the playback error.
Note.
The “Ready to play” status indica
tes that all the Wall Devices are in proper working
order and are synchronized.
3.
Select a playlist from the list of the uploaded content (Picture 44b)
(a)
(b)
(c)
