PAC200T/E Torch Handle
Replacement
Field Service Bulletin
804830 – Revision 0 – June, 2004
Hypertherm, Inc.
Etna Road, P.O. Box 5010
Hanover, NH 03755 USA
603-643-3441 Tel 603-643-5352 Fax
www.hypertherm.com
Page 1: ...PAC200T E Torch Handle Replacement Field Service Bulletin 804830 Revision 0 June 2004 Hypertherm Inc Etna Road P O Box 5010 Hanover NH 03755 USA 603 643 3441 Tel 603 643 5352 Fax www hypertherm com ...
Page 2: ...05 PAC200T E 90 torch handle 1 2 002519 Boot 1 3 010758 PAC200T label 1 4 010759 PAC200E label 1 5 075365 Screws 6 6 110259 CE CSA label 1 Kit 128905 Item Part Number Description Qty 1 001906 PAC200T E 65 torch handle 1 2 002519 Boot 1 3 010758 PAC200T label 1 4 010759 PAC200E label 1 5 075365 Screws 6 6 110259 CE CSA label 1 WARNING ELECTRIC SHOCK CAN KILL Disconnect electrical power before perfo...
Page 3: ... Place torch into right handle and route wires as shown above Note Route start switch wires underneath the torch body gas tubes 3 Place trigger and trigger spring into handle as shown above 4 Attach left handle with the supplied screws using a 2 Phillips screw driver Note Verify that the start switch wires will not be pinched when the left handle is attached 5 Connect torch lead to power supply an...
Page 4: ... Copyright 2004 Hypertherm Inc All Rights Reserved Hypertherm and Powermax are trademarks of Hypertherm Inc and may be registered in the United States and or other countries ...
