50
HyPrecision15/30/50
Operator
Manual 808240
4 – Operation
O
p
er
ation
Operate the pump
Operator interface
The hour meter on the top left of the operator interface screen shows the total hours the pump has been in operation. The
current date and time are on the top right. These are on every screen.
Four screens are used to operate the pump: the primary screen, the pump running screen, the cooling mode screen, and
the intensifier settings screen. A series of alarm screens is also available to diagnose and resolve faults.
CAUTION
When an original equipment manufacturer (OEM) or a system integrator makes a cutting system by
combining Hypertherm equipment with other equipment, the end-use customer and the OEM or the
system integrator are responsible for supplying protection against hazardous moving parts.
Hypertherm Inc. recommends taking these actions to prevent operator injury and equipment damage:
• Read and understand the instruction manual supplied by the OEM or the system integrator.
• Maintain a restricted-access area larger than the maximum movement range of the cutting system’s
moving parts.
• Where there is a risk of a collision, do not permit people or equipment near the cutting system’s moving
parts.
• Prevent accidental contact with the touchscreen or joystick on the computer numerical control (CNC)
machine. Accidental contact can cause unexpected operation that can result in unintended motion.
• Do not do maintenance, repair, or clean the machinery during operation.
• If maintenance or repair is required, enable the safety interlock or disconnect and lock out–tag out the
primary power to disable the motors and prevent motion.
• Permit only qualified people to operate, maintain, and repair this machinery.
1
2
3
5
4
6
1
Hour meter
2
F1 and F2
3
Numeric keypad
4
Date and time
5
Enter
6
Direction arrows
Summary of Contents for HyPrecision 15
