Hypertherm HyPrecision 15, Operator'S Manual

Page: 100 / 194

100 HyPrecision15/30/50 Operator Manual 808240
5 – Preventive maintenance
Preventive maintenance
Every 6,000 hours
Replace the output adapters
Replace the seal housings
Replace the indicator pins

To reduce downtime, Hypertherm recommends doing preventive maintenance on both ends of the intensifier at the
same time.

Refer to the Parts lists section, which begins on page 147, for part numbers and ordering information.
Required tools, materials, and parts
11530 Output adapter
11609 Seal housing
11518 Indicator pin
1-inch open-ended wrench
1. Disassemble the intensifier to access the parts. Refer to page 104 for instructions.
2. Discard the used parts.
3. Install the new parts.
4. When all maintenance tasks are complete, reassemble the parts. Refer to page 111 for instructions.
Repair or replace parts identified in the preventive maintenance schedule or if the parts show signs of
deterioration, corrosion, or damage.
Put the parts on a clean, dry, oil-free surface.
1
2
3
1 Output adapter
2 Seal housing
3 Indicator pin