www.Hyperion-world.com
7
Charge
To charge the internal 1800 mAh Li Ion battery, you need a suitable 7 -
22 V DC net adapter (not included in the package content).
Plug the net adapter in a suitable net socket, then connect the plug
in the “DC IN” port of the monitor.
During charge the red LED (near the buttons) lights on. When the
charge process has finished, the red LED shuts down.
The Li Ion battery is replaceable. To remove it, pull the lock button
to the bottom and pull gently the battery from its place.
To plug, slide the battery diagonally into the slot so that the
contacts can take place first.
Screen shroud and tripod thread
To be able to optimally use the monitor even when sun shines, use the
screen shroud. It can be easily fixed on the monitor.
The thread for tripod or other monitor holders is on the bottom of the
monitor. So it is easier to use.
Commissioning
Screw the included 5,8GHz antennas on the two connectors placed on the
top back of the monitor.
The power is supplied by the integrated Li Ion battery, pay attention to
charge the battery before use.
To use the monitor, push the On/Off button (power) right for 3 seconds.
The LED lights on blue. The monitor scans now automatically the channels
looking for a video signal and shows the image.
Buttons Description
Receiver select
Manual select one of the two receivers
Band select
Manual select one of the three signal band A/B/F
Channel select
Manual select one of the eight channels 1-8
SCAN function
The monitor searches (Auto Scan Function)
automatically
all bands and channels