Number of LiFe Cells Wired in Series (Pack Voltage)
1S
3.3V
2S
6.6V
3S
9.9V
4S
13.2V
5S
16.5V
6S
19.8V
Setting charge current
The EOS 0606i will charge the battery at a 1C rate from the capacity you tell it. It is possible to
charge at higher than 1C but the user accepts all responsibility.
Setting battery charge voltages for A123/LiFe battery pack
Set the number of cells in series that make up your battery pack. This in turn, with the correct
cell type, tells the charger the packs voltage. Used with the balancer makes for safer charging.
Setting discharge current
Press Enter to find and adjust the desired discharge current from 0.10A to 1.00A (0.01A per
step) with the INC & DEC buttons. Press the ENTER button to confirm the setting.
NiCd / NiMH OPERATION MODES
(NiMH mode is the same as below, except Mode shows ‘NiMH’)
NiCd/NiMH continued next page
DCH 0:00 00000
LF - 1.00A 19.800V
LiFe CHARGE
C=1100mAh 4S
LiFe DISCHARGE
D=1.00 A 4S
BATT TYPE
LiFe CHARGE
C=2300mAh 4S
DEC
INC
INC
ENTER
ENTER
LiFe CHARGE
C=2300mAh 5S
BATTERY CHECK
WAIT PLEASE . . .
START
CHG 0:00 00000
LF + 2.50A 19.000V
LiFe CHARGE
C=4600mAh 5S
LiFe CHARGE
C=4600mAh 5S
LiFe DISCHARGE
D=1.00 A 5S
BALANCER CON.
CONNECTED
DEC
LiFe DISCHARGE
D=1.00 A 4S
DEC
INC
INC
DEC
INC
DEC
ENTER
ENTER
LiFe DISCHARGE
D=1.00 A 5S
BALANCER CON.
CONNECTED
START
BATTERY CHECK
WAIT PLEASE . . .
NiCd CHARGE
C=3.0A
16.8V
ENTER
NiCd DISCHARGE
D=1.00A 16.8V
INC
DEC
see next page for
Trickle and Delta-v
settings
NiCd CYCLE D->C 5
C=3.0A D=1.00A
NiCd CHARGE
C=3.00A 16.8V
INC
BATTERY CHECK
WAIT PLEASE. . . .
START
CHG 0:00 00000
NC + 3.00A 16.800V
NiCd DISCHARGE
D=1.00A 16.8V
NiCd DISCHARGE
D=1.00A 16.8V
INC
BATTERY CHECK
WAIT PLEASE. . . .
DCH 0:00 00000
NC - 1.00A 16.800V
DEC
NiCd CYCLE D->C 5
C=3.0A D=1.00A
NiCd CYCLE D->C 5
C=3.0A D=1.00A
NiCd CYCLE D->C 5
C=3.0A D=1.00A
NiCd CYCLE D->C 5
C=3.0A D=1.00A
ENTER
ENTER
INC
INC
DEC
DEC
INC
DEC
INC
DEC
ENTER
ENTER
ENTER
ENTER
DEC
INC
DEC
INC
DEC
INC
START
START
DEC
DEC
INC
NiCd CYCLE C->D 5
C=3.0A D=1.00A
BATTERY CHECK
WAIT PLEASE. . . .
BATT TYPE
DCH 0:00 00000
NC + 3.00 1.200V
