LiPo CHARGE
C=6000mAh 6S
LiPo CHARGE
C=6000mAh 6S
LiPo DISCHARGE
D=1.00 A 6S
S
OLYMER/ION MODE
(for 3.7V/cell types only!)
etting LiPo battery capacity
ery capacity from 100mAh to 6000mAh with INC & DEC buttons
t
etting Battery Voltage / Number of Cells in Series for LiPo battery packs
cell count e.g. ‘6S’
OTE: The EOS Series chargers have intelligent detection routines to help you avoid making
etting discharge parameters
rrent from 0.10A to 1.00A (0.01A per step) with INC & DEC button.
iFe MODE [LiFePO4, A123]
he LiFe charge/discharge modes are intended for cells with 3.3V nominal, with Lithium Phosphate chemistry. The LiFe
ue to the nature of A123/LiFePO4 cells (wide divergence in cell voltages during charging) and due to the high rates at which
Number of LiPo Cells Wired in Series (Pack Voltage)
OLYMER/ION MODE
(for 3.7V/cell types only!)
etting LiPo battery capacity
ery capacity from 100mAh to 6000mAh with INC & DEC buttons
t
etting Battery Voltage / Number of Cells in Series for LiPo battery packs
cell count e.g. ‘6S’
OTE: The EOS Series chargers have intelligent detection routines to help you avoid making
etting discharge parameters
rrent from 0.10A to 1.00A (0.01A per step) with INC & DEC button.
iFe MODE [LiFePO4, A123]
he LiFe charge/discharge modes are intended for cells with 3.3V nominal, with Lithium Phosphate chemistry. The LiFe
ue to the nature of A123/LiFePO4 cells (wide divergence in cell voltages during charging) and due to the high rates at which
Number of LiPo Cells Wired in Series (Pack Voltage)
LITHIUM P
LITHIUM P
S
S
Adjust and set the desired batt
Adjust and set the desired batt
(50mAh per step). Press the ENTER button to confirm setting. Charge rate is set on the basis of
selected capacity, at 1C rate. Example: Li-Po cell of 1500mAh capacity: 1C = 1500mAh (= 1.5A).
If your battery is larger than 6000mAh, you can charge it at the 6000mAh setting, but it will jus
(50mAh per step). Press the ENTER button to confirm setting. Charge rate is set on the basis of
selected capacity, at 1C rate. Example: Li-Po cell of 1500mAh capacity: 1C = 1500mAh (= 1.5A).
If your battery is larger than 6000mAh, you can charge it at the 6000mAh setting, but it will jus
take longer to finish charging.
take longer to finish charging.
S
S
Select the total battery voltage to be charged with ENTER, INC & DEC buttons.
Select the total battery voltage to be charged with ENTER, INC & DEC buttons.
The charger knows the pack’s voltage both from the balancer connector and the
The charger knows the pack’s voltage both from the balancer connector and the
N
N
mistakes, and LOW or HIGH VOLTAGE errors are displayed if battery voltage does not match your
setting. HOWEVER, under some circumstances, especially with over-discharged or damaged
batteries, the safeguard could fail. Therefore, be absolutely sure that you have correctly set pack
voltage correctly before charging, every time!
Using LBA cell balancer with EOS Charger is
STRONGLY recommended, as it greatly increases safety.
mistakes, and LOW or HIGH VOLTAGE errors are displayed if battery voltage does not match your
setting. HOWEVER, under some circumstances, especially with over-discharged or damaged
batteries, the safeguard could fail. Therefore, be absolutely sure that you have correctly set pack
voltage correctly before charging, every time!
Using LBA cell balancer with EOS Charger is
STRONGLY recommended, as it greatly increases safety.
S
S
Adjust to the desired discharge cu
Adjust to the desired discharge cu
Press the ENTER button to confirm setting. Set pack voltage, 1S~6S as in charging example above.
Autocut occurs automatically at 3.0V per cell.
Press the ENTER button to confirm setting. Set pack voltage, 1S~6S as in charging example above.
Autocut occurs automatically at 3.0V per cell.
L
L
T
(LiFePO4 charge/discharge modes are intended for cells with 3.3V nominal produced by A123 Company, or other-brand
LiFePO4 cells which are recognized to be of good quality from well-known makers. Choose LiFe for BATT TYPE, for charging
such cells. The LiFe charge mode MAY work with “no brand” LiFePO4 cells having 3.3V nominal voltage, but Hyperion has
found some “knock off” cells in the market of very questionable quality. Customers who use A123 mode (LiFePO4
mode) to charge such off-brand cells assume all risk. In no case does Hyperion HK Ltd. Accept liability due to the
failure of the cell(s) itself during charging or discharging.
T
(LiFePO4 charge/discharge modes are intended for cells with 3.3V nominal produced by A123 Company, or other-brand
LiFePO4 cells which are recognized to be of good quality from well-known makers. Choose LiFe for BATT TYPE, for charging
such cells. The LiFe charge mode MAY work with “no brand” LiFePO4 cells having 3.3V nominal voltage, but Hyperion has
found some “knock off” cells in the market of very questionable quality. Customers who use A123 mode (LiFePO4
mode) to charge such off-brand cells assume all risk. In no case does Hyperion HK Ltd. Accept liability due to the
failure of the cell(s) itself during charging or discharging.
D
some of these cells – such as A123 brand – can be charged, one MUST ALWAYS properly use the cell balancer function
whenever charging in LiFe Mode; failure to do so will result in poor pack performance at best, and damage to cells at worst.
Customers who charge in LiFe mode without balancer connected assume all risk of charger and battery failure!
D
some of these cells – such as A123 brand – can be charged, one MUST ALWAYS properly use the cell balancer function
whenever charging in LiFe Mode; failure to do so will result in poor pack performance at best, and damage to cells at worst.
Customers who charge in LiFe mode without balancer connected assume all risk of charger and battery failure!
1S
2S
7
3S
11.1V
4S
14.8V
5S
18.5V
6S
22.2V
3.7V
.4V
LiPo CHARGE
6S
C=6000mAh
LiPo DISCHARGE
D=1.00 A 6S
BATT TYPE
INC
DEC
LiPo CHARGE
C=6000mAh 6S
LiPo CHARGE
C=6000mAh 6S
BATTERY CHECK
WAIT PLEASE. . . .
CHG 0:00 00000
LP + 2.20A 22.200V
ENTER
ENTER
DEC
LiPo DISCHARGE
D=1.00A 6S
LiPo DISCHARGE
D=1.00A 6S
BATTERY CHECK
WAIT PLEASE. . . .
DCH 0:00 00000
LP + 1.00A 22.200V
START
INC
INC
DEC
ENTER
ENTER
INC
DEC
DEC
INC
START
BALANCER CON.
CONNECTED
BATTERY CHECK
WAIT PLEASE. . . .
