www.hypercable.fr
-
www.e-rake.us.com
36
Hardware reset
If your Web User Interface stops responding, ping the IP address of the radio to check whether
“reply” is obtained, or unplug and then plug back in the power supply of the Radio. This will reboot
the Radio. If you are still unable to communicate with the Web User Interface, remove the plastic cap
in the left of radio’s bottom, Then use a stick to press in and hold the RESET button for 6~9 seconds.
This will reset the Radio to the factory default settings. If you applied any personal configuration
settings, you will need to make the changes again.
Reset button of the radio
Reset button
