DIAGRAM
SPECIFICATIONS
Video format:
AVI
Video resolution: 720 x 480
Photo format:
JPEG
Image ratio:
4:3
Input:
DC-5V 200mAh
Storage support:
Micro SD card
Battery type:
Rechargeable lithium
Supported Memory:
16G of
micro SD card
(Max)
Charging Interface:
USB
Operating Instructions
1. Status Indicator
• Blue: video-recording mode
• Red: camera-mode
• Red and Blue: video is currently recording
2. Turning Camera On/Off
• Insert the micro SD card.
• Press the ON/OFF switch.
• The lights will cycle through red lights, blue lights to
initialize the camera. When the red light turns off, the
device will enter standby mode.
• Press the ON/OFF switch until the blue light turns off
to turn the device off.
3. Manual Recording Mode
•Hold the operation button for 2 seconds to start the
7
Hype
®
reserves the right to exchange the product for a
replacement product of equal value if the product
sent in cannot be repaired within a reasonable time or
at a reasonable cost. Requests cannot be made for
repairs to be carried out on site. Parts that have been
replaced or exchanged become our property.
4) The warranty claim does not apply if repairs or other
work is carried out by unauthorized persons or if our
products are equipped with additional parts or
accessories that are not approved for our product.
5) Warranties that have been activated do not cause
the warranty period to be extended, nor do they
trigger a new warranty period. The warranty period for
any replacement parts installed ends with the warranty
period for the entire product.
6) Any other further claims are excluded, especially
those for replacement due to damage caused to the
outside of the product, provided there is no obligatory
legal liability. We therefore accept no liability for
accidental, indirect or other consequential damage
of any kind, which leads to usage restrictions, data loss,
and loss of earnings or interruption to business.
Asserting a warranty claim:
1) To make use of the warranty service for hardware
issues, you must contact the Hype
®
Service Center by
email at [email protected]
2) Hype
®
will try to diagnose and solve your problem. If
it is determined that a warranty claim exists, you will be
given an RMA number (Return Material Authorization)
and will be asked to send the product to Hype
®
.
IMPORTANT: Hype
®
will only accept parcels that have
an RMA number.
Please observe the following when sending the
product:
1) Send the product suitably packaged with carriage
and insurance paid. Do not enclose any accessories
with the product (cables, chargers, manuals, etc.)
unless the Hype
®
Service Center specifies otherwise.
2) Mark the RMA number on the outside of the
package in such a way that it is visible and clearly
legible.
3) You must enclose a copy of the sales slip as proof of
purchase.
