DIAGRAM
Operating Instructions
1. Weighing Luggage
• Press the ON/OFF button to turn the scale on.
• The screen will show 888, then show 0.0kg.
• Press the UNIT button once to switch between kg
(metric) or lb (standard).
• Attach the strap to your luggage. Ensure your
luggage is upright.
• Lift the luggage using the webbing on the strap for
at least 3 seconds.
• The luggage weight will be reflected on the scale.
• Press the ON/OFF button quickly to reset the data.
• Hold the ON/OFF button for 2 seconds to turn it off.
• The digital scale will automatically shutdown after
no use after 180 seconds to conserve power.
2. Setting Combination Lock
• The luggage strap has a default lock of 0-0-0.
• Press the and hold LOCK SETTING button and select
your desired 3-digit code using the CODE WHEEL.
• Release the LOCK SETTING button when you have
reached your desired combination.
• Scramble the CODE WHEEL to lock your strap after
you have attached it to your luggage.
WARRANTY INFORMATION
The condition of this warranty and our responsibilities under
this warranty are as follows:
5
Supplier’s warranty is non-transferable. And this warranty
is limited to the original purchaser only.
* You must be able to prove the date of original purchase
of the unit with a dated receipt.
* The warranty is not applicable if the product has been
subject to physical abuse, improper installation,
modification or repair by unauthorized third party.
* The responsibility of supplier’s products shall be limited to
the repair of replacement of the product as its sole
discretion.
* Specifically exempt from any warranty are limited-life
consumable components subject to normal wear and
tear such as batteries, decorates and other accessories.
* A supplier will not take any responsibility if the failure of
the unit has resulted from accident, abuse, misuse, or any
unauthorized repair, modification or disassemble.
* Modification and repair of the unit should be done by
authorized and qualified service personnel, Center or
returned to the manufacturer.
* This warranty gives you specific legal rights, and you
may also have other rights which vary under local laws.
The following conditions comprise the requirements
and scope of our warranty conditions and do not
affect our legal and contractual warranty obligations.
We offer a warranty on our products in accordance
with the following conditions:
1) Hype
®
products are covered by a 12 month
warranty. We will resolve damages or defects on
Hype
®
products free of charge within 12 months of the
purchase date under the following warranty
conditions. For any damage or defect determined
later than 12 months after the purchase date, proof of
a manufacturing fault must be submitted for repair
under warranty.
2) The warranty does not cover batteries and other
parts, which are considered consumables, parts that
break easily such as glass or plastic or defects based
on normal wear and tear. There is no warranty
obligation in the event of marginal differences
compared to the target appearance and workman-
ship provided these have a negligible effect on the
product’s fitness for use, in the event of damage
caused by chemical or electrochemical effects, by
water or generally from abnormal conditions.
3) The warranty will be performed in such a way that
we shall decide whether to repair the defective parts
or to replace them with working parts free of charge.
Hype
®
reserves the right to exchange the product for a
replacement product of equal value if the product
sent in cannot be repaired within a reasonable time or
at a reasonable cost. Requests cannot be made for
repairs to be carried out on site. Parts that have been
replaced or exchanged become our property.
4) The warranty claim does not apply if repairs or other
work is carried out by unauthorized persons or if our
products are equipped with additional parts or
accessories that are not approved for our product.
5) Warranties that have been activated do not cause
the warranty period to be extended, nor do they
trigger a new warranty period. The warranty period for
any replacement parts installed ends with the warranty
period for the entire product.
6) Any other further claims are excluded, especially
those for replacement due to damage caused to the
outside of the product, provided there is no obligatory
legal liability. We therefore accept no liability for
accidental, indirect or other consequential damage
of any kind, which leads to usage restrictions, data loss,
and loss of earnings or interruption to business.
Asserting a warranty claim:
1) To make use of the warranty service for hardware
issues, you must contact the Hype
®
Service Center by
email at [email protected].
2) Hype
®
will try to diagnose and solve your problem. If
it is determined that a warranty claim exists, you will be
given an RMA number (Return Material Authorization)
and will be asked to send the product to Hype
®
.
IMPORTANT: Hype
®
will only accept parcels that have
an RMA number.
Please observe the following when sending the
product:
1) Send the product suitably packaged with carriage
and insurance paid. Do not enclose any accessories
with the product (cables, chargers, manuals, etc.)
unless the Hype
®
Service Center specifies otherwise.
2) Mark the RMA number on the outside of the
package in such a way that it is visible and clearly
legible.
3) You must enclose a copy of the sales slip as proof of
purchase.
4) Once Hype
®
has received the product, it will meet its
warranty obligations in accordance with the warranty
conditions and will return the product to the sender
with carriage and insurance paid.
Service outside of warranty
Hype
®
can refuse any service claim made that is not
covered by the warranty.
If Hype
®
agrees to provide a service outside the
warranty, the customer will be invoiced for all repair
and transport costs. Hype
®
will not accept any
packages that have not first been approved by
Hype
®
by means of an (Return Material Authori-
zation).