HYOSUNG Rally Manual Download Page 51

Page: 51 / 59

PLUG REPLACEMENT GUIDE

Hotter type

Standard type

Colder type

BR7HSA

BR8HSA

BR9HSA

Readjust the spark plug gap to 0.6

�

0.7mm (0.024

0.028 in) by using a spark

plug gap thickness gauge.

0.6~0.7mm
(0.024�0.028 in)

●

Do not over torque or cross thread
the spark plug or the aluminum
threads of the cylinder head will be
damaged.

Do not allow contaminants to enter
the engine through the spark plug
holes when the plug is removed.

●

The standard spark plug for this
motorcycle has been carefully select-
ed to meet the vast majority of all
operational ranges. If the spark plug
color indicates that other than a stan-
dard spark plug be used, it is best to
consult your

Hyosung

dealer before

selecting an alternate plug or heat
range. The selection of an improper
spark plug can lead to severe engine
damage.

CAUTION

Remove the carbon deposits periodically

from the spark plug with a piece of hard wire
or pin.

Check if the mirror shows the rear and/or

side views.

SPARK PLUG

REAR-VIEW MIRROR

●

Check if the reflector is dusty or dam-
aged.

REFLECTOR

*Rally(o/m)-E/060207

2006.2.7

6:44

페이지50

001

PagePro

9100

300DPI

100LPI

COPYRIGHTED

Summary of Contents for Rally




























































Search results

Summary of Contents for Rally

Reviews:

Related manuals for Rally

Brands by name

Popular brands

HYOSUNG Rally, Manual

Search results

Summary of Contents for Rally

Reviews:

Related manuals for Rally

Brands by name

Popular brands