탈폼
LIGHT SWITCH
◉
position
The meter lamp and taillamp come on.
◉
position
The meter lamp and taillamp go off.
STARTER SWITCH
Use this switch to operate the starting
motor.
With the ignition switch in the ON
position, the engine stop switch in the
position, and the transmission is in
neutral, pull in the clutch lever and push the
starter switch to start the engine.
THROTTLE GRIP
Engine speed is controlled by position of
the throttle grip. Turn it toward you to
increase engine speed. Turn it away from
you to decrease the engine speed.
Apply the brake lightly and with great
care on slippery surfaces to avoid
skidding.
WARNING
Avoid turning the throttle grip during
brakes.
WARNING
This motorcycle always come on the
headlamp when starting the engine.
CAUTION
Do not engage the starting motor for
more than five seconds at a time as it
may overheat the wiring harness and
starting motor.
If the engine does not start after several
attempts, check the fuel supply and
igintion system.
(Refer for Page 56)
CAUTION
