HYOSUNG COMET 125 - SERVICE, User Manual, Page: 28 / 82

28
① ①
CLUTCH LEVER
The clutch lever is used for disengaging
the drive to the rear wheel when starting
the engine or shifting the transmission gear.
Squeezing the lever disengages the
clutch.
② ②
“ “
PASS
” ”
SWITCH
Press the
“
PASS
”
switch to operate the
head lamp high beam for using when pass.
⑤ ⑤
HORN SWITCH
Press the switch to operate the horn.
④ ④
TURN SIGNAL SWITCH
Using when left, right turn or change
direction.
◉ “ � ” Position : Flash the left turn
signal lamp.
◉
“
�
” Position : Flash the right turn
signal lamp.
③ ③
DIMMER SWITCH
Change direction of head lamp light.
◉ “ ” : The head lamp high beam
come on.
The high beam indicator lamp
also comes on.
◉ “ ” : The head lamp low beam
come on.
LEFT HANDLE SWITCH
Do not operate when the dimmer switch
“
” position.
CAUTION
Set the dimmer switch “ ” when other
vehicle is running in front or against.
WARNING
Always use the turn signals when you
intend to change lanes or make a turn.
Always be sure to turn the turn signal
switch to the “OFF” position after
completing the turn or lane change.
CAUTION
�
�
�
�
�
�
�
�
�
�
&
&
*GT250R/S영문내지/060207 2006.2.7 6:34 PM 페이지28 001 PagePro 9100 300DPI 100LPI