EN © 2020 Hykker.
All rights reserved. SOUND STORM
26
Use the supplied cable to charge the battery before switching
on the device for the first time.
If you have problems with the
battery or need to replace it, please contact the manufacturer's
service centre. Use only chargers and cables approved by the
manufacturer. Using incompatible chargers and cables can
cause explosion of the battery or damage to your device.
Incorrect charger connection (USB cable) can cause damage to
the AC adapter or the device. All damages resulting from
improper handling are not covered by the warranty.
We recommend that you turn off the device during the
battery charging process.
To charge your device, you need to plug the USB plug of the
cable into a power outlet on a powerbank or network
charger with 1A current at its output or a laptop with 0.5A
at its output, in which case charging MUST be done with the
speaker turned off. When charging starts, the signalling
diode in the speaker lights up red. The device can heat up
during charging. It is a regular occurrence and should not
affect the stability or performance of the device. Do not
leave the charged device unattended, as this may result in
fire or damage to equipment and other environmental
hazards. When the battery is charged, the LED will turn off.
Disconnect the charging cable from the USB port from
which power was being drawn. If the device does not charge
properly deliver it (with the charger) to a service center of
the manufacturer.
