Page 55
6.8.14 Relay extension 1 submenu
This icon is only visible in the main menu if
relay extension 1 has been enabled in the
"Functions" submenu. The assignment of the
respective relays and the function definition
of the digital input present on the relay board
can be made here.
Table of possible assignments
ST0
2
ST03
ST04
Relay 5
Relay 6
Relay 7
Relay designations on the
Relay extension 1 p.c.b.
No. Parameter
No.
Meaning/comment
[ ] explains the term in the glossary
[ ] refers to a related term explanation
1
Assignment_relay 5
Occupancy selection as for basic relay (see submenu "Functions", 15)
2
Assignment_relay 7
Occupancy selection as for basic relay (see submenu "Functions", 15)
3 Signal_type_V_range
Occupancy selection as for basic relay (see submenu "Functions", 15)
4 Signal_type_mA_range
Mapping of the digital input function [98] to relay board 1
0
Off
Not used
1 Push_button_light 1
Activated digital input [97] by a pushbutton [106] switches on light 1
2 Push_button_light 2
Activated digital input [97] by a pushbutton [106] switches on light 2
3 Push_button_light 3
Activated digital input [97] by a pushbutton [106] switches on light 3
4 Push_button_light 4
Activated digital input [97] by a pushbutton [106] switches on light 4
10 ECO
Activated digital input [97] by a pushbutton [106] switches ECO mode on
20 Steam_boost
Activated digital input [97] by a pushbutton [106] triggers steam jet [60]
30 Timer_start
Activated digital input [97] by a pushbutton [106] starts timer function [18]
40 Power_limitation
Activated digital input [97] by a switch (NO) switches power limitation on for load shedding
[101]
Adjustment/value range
Factory presets (FP) bold
as base relay
as base relay
as base relay
