1072_B
11
June 2020
Display Units & Alarm Set Point Adjust
Configuration options are available through a push button interface on the PC
board. Locate the buttons labelled UP and DOWN near the sensor housing.
These two buttons are used to navigate
through the menu. Scroll through options
using the
UP
and
DOWN
buttons, and press
both buttons together to select (this is the
ENTER
command).
WARNING:
Menu navigation is performed
while power is applied to the hygrometer.
Avoid touching other parts of the PC board
or electrical terminals while pressing
buttons.
Enable
configuration
mode by pressing
ENTER
. If no buttons are pressed for some
time, the unit will automatically revert to
operational
mode.
↑
UP
button: increase value or scroll through menu
→
ENTER
(press
UP
and
DOWN
together)
↓
DOWN
button: decrease value or scroll through menu
