VISUAL INSPECTIONS (Continued)
END OF LINE COMPLETE WITH GAUGE
(PART NO. 304150010)
VALVE LEVER
LOCKING SCREW
FIGURE 4
E000938
The responsible person should record the results of these
visual inspections and arrange for corrective action, where
necessary, by a competent person. If in doubt, the respon-
sible person should arrange for a competent person to
examine the system.
IN THE EVENT OF A FIRE
In the event of a fire, the SAPPHIRE COMPACT Fixed Fire
Suppression System is designed to operate automatically.
Any pressure switches fitted and their integration with other
equipment and any subsequent actions, including alarm,
equipment isolation, and evacuation, are determined by the
local requirements, and should be referred to.
Follow all other local specific fire emergency procedures.
SYSTEM REPAIR AND MAINTENANCE
If at any time a system discharges, loses pressure, or
appears abnormal in any way, contact Johnson Controls
to request a review of the system. The responsible person
should complete the details on the SAPPHIRE COMPACT
Cabinet Caution Sign (Part No. 314150013). See Figure 5.
Use the warning sign to notify users that the system is fitted.
This cabinet is fitted with
a local direct application
fire suppression system
DO NOT modify the system without
appropriate authority.
Ensure system is disabled before
any work is carried out on the
cabinet or system.
Failure to do so can result in injury.
Novec™ 1230
314150013
Caution !
FIGURE 5
E000953
FIGURE 3
E000835
PLANNED SERVICE
The system should be serviced annually by Johnson
Controls or an approved Johnson Controls distributor.
See the details in the latest revision of the SAPPHIRE
COMPACT manual (Part No. 14A-50H).
3M and Novec are trademarks of 3M Company.
HYGOOD, SAPPHIRE, and the product names listed in this material are
marks and or registered marks. Unauthorised use is strictly prohibited.
SAPPHIRE COMPACT FIXED FIRE SUPPRESSION SYSTEM
INSTALLATION GUIDE
PAGE 2 REV. 00 2019-OCT-07
PRESSURE GAUGE -
1 SWITCH CONTACT FOR LOW
PRESSURE MONITORING
(PART NO. 302150001 AND 302150002)
PRESSURE GAUGE -
2 SWITCH CONTACTS FOR LOW
PRESSURE AND DISCHARGE MONITORING
(PART NO. 302150003 AND 302150004)
(PART NO. 302150010 AND 302150011 - LIQUID
FILLED PRESSURE GAUGE)
