Water tank.
Water from hands drops directly to a removable water tank. When water from the
removable water tank reaches the ‘full level’ an acoustic alarm sounds and the blue
pilot light bright (see Fig.). In this case, water in the tank must be emptied.
Two options to remove the water from the water tank are available:
• Press the two lateral clips and pull down the water tank, as the picture shows.
Remove the water tank from its fitting place, empty and clean the tank and re-place it.
• Press the push button as indicated in Fig. until remove all the water contained into the
water tank.
Cleaning:
• For cleaning purposes, only a wet cloth is to be used. Do
not use any kind of
detergent, acids, lye, abrasives, hydrochloric acid, etc.
• Ensure that viewers IR LED’s (interior windows machine)
are clean and transparent.
Attention: Take care not to damage or force any
component.
Pilot light information
Light lids on the top of the hand dryer (see figure) give advice about:
• Standby (green colour) or operation status (orange colour).
• Red colour led bright when motor has a problem of consumption
(due to brushes which may be wearing out or
due to a blocked or locked sate of motor).
• Blue colour led bright when cabinet of water is full.
