EN
3
6. Press [START/STOP/MEMORY] to start all timers’ count down simultaneously.
7. Press the button again to pause.
8. Press the button once more to resume count down.
9. The timer will sound when each setting’s display value becomes 0:00 00 and
will be counting up to show the elapsed time.
10.
Press [START/STOP/MEMORY] will stop TIMER 1, press the button again will
stop TIMER 2 and press the button once more will stop TIMER 3.
11.
Press [CLEAR] to clear all values.
12.
Press [START/STOP/MEMORY] will display the memorized preset values.
13.
To operate each timer individually, Press T1, T2, or T3 respectively to start or
stop the timer, or recall the memorized preset values after pressing the
[CLEAR] button.
Count Up:
Press [CLOCK/TIMER] to select clock mode.
1.
Press [CLEAR] to clear display values.
2.
Press [START/STOP/MEMORY] to start count up.
3.
Press the button again to pause.
4.
Press the button to resume count up.
5.
* During setting the values, press and hold the [HR], [MIN] or [SEC] button will
increase the values automatically.
C
ompliance
Dispose of depleted batteries in accordance with local regulations, within the EC there are
nominated disposal points for batteries.
The WEEE logo on this product or its documentation indicates that the
product must not be disposed of as household waste. To help prevent
possible harm to human health and/or the environment, the product
must be disposed of in an approved and environmentally safe recycling
process. For further information on how to dispose of this product
correctly, contact the product supplier, or the local authority responsible
for waste disposal in your area.
HYGIPLAS parts have undergone strict product testing in order
to comply with regulatory standards and specifications set by
international, independent, and federal authorities.
HYGIPLAS products have been approved to carry the following symbol:
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording or otherwise, without the prior written permission of HYGIPLAS.
Every effort is made to ensure all details are correct at the time of going to press, however, HYGIPLAS reserve the right to change
specifications without notice.
Summary of Contents for CF915
Page 19: ......
