Hygiena DUP-1000, User Manual

Page: 5 / 26

2 Automated Thermal Block
Specifications and Requirements
Item Specification
Dimensions (with lid) 6.5 ″ W x 8.75 ″ D x 8 ″ H (16.5 x 22.25 x 20.3 cm)
Weight Approximately 8 lbs. (3.6 kg)
Power usage 12 volts, 8.4 amps
Power requirements 90 to 265 volts AC, 50/60Hz
Thermal range -10 °C to 110 °C (14 to 230 °F)
Thermal uniformity ±1 °C as measured at the block surface
Thermal accuracy ±1 °C as measured at the block surface
Sample throughput 1-96 samples per cycle
Room environment Temperature between 65 and 89 °F (18 and 32 °C)
Safety Symbols and Precautions
Safety Symbols
Symbol Description
Indicates that you should consult the manual for further information and proceed with
appropriate caution.
Indicates the presence of a hot surface or other high-temperature hazard and
proceed with appropriate caution.
Indicates the presence of an electrical shock hazard and proceed with appropriate
caution.
General Safety Information
Extreme Temperatures
The thermal block is capable of reaching 110 ºC (230 ºF), which can burn
the skin if touched.
To prevent injury, remember the following:
• Use extreme caution around the block at all times.
• Never leave the block accessible to others when it is hot.
• Do not touch the plate surface unless you are sure it has cooled.
• Always keep the lid in place when the block is not in use.
Power Requirements
Always use the supplied AC power cord when connecting the heating
block to a power source. Use the normal care and precaution that one would
use with any electrical appliance.