2.METHOD OF APPLICATION:
The minimum water level is between 3.54 to 4.72 inches.
3.54 to 4.72 inch
The surface skimmer is adjustable. The minimum water level must
be higher than the surface skimmer; when using the surface skimmer,
it wil
l fl
oat on the water to adjust to the water level.
1
1.
Connect the surface skimmer to the intake pipe an
d fi
x it tightly
。
2.
Ensure th
e fi
lter media i
s fi
rmly placed in th
e fi
lter housing. Th
e fi
rs
t fi
lter layer is the bio-sponge, the second is
activated carbon and the last is bio-balls.
3.
Hang the installe
d fi
lter on the aquarium, and rotate the adjustment knob so as to keep the hang-o
n fi
lter parallel.
Adjust the intake pipe to the correct distance.
4.
Fill th
e fi
lter chamber with water.
5.
Power on and adjust the surface skimmer; the minimum water level must be higher than the surface skimmer when
using then the surface skimmer, which wil
l fl
oat on the water
（
If the surface skimmer doesn’
t fl
oat, you must adjust the
water level.
6.
Adjust the wate
r fl
ow appropriately.
2
3
4
5
6
3.TROUBLE SHOOTING
4.PRODUCT PARAMETER
5. ATTENTIONS:
6. PACKAGE INCLUDES:
7.WARNING:
5.9"×4.33"×6.3"
Fault
Possible cause
Solutions
No wate
r fl
ow
Something in rotor make it cannot run
Power off
Check that th
e fi
lter is plugged in
Clean the rotor
Water inlet tube installed wrong
Reinstall the surface skimmer
Abnormal sound
The water level is below the bracket
Water inlet tube installed wrong
Add water into the aquarium
Reinstall the surface skimmer
Flow decrease
Filter media is full
Replace th
e fi
lter media
Voltage
AC 110-120V / 60 Hz
Power
12W
Q.Max
158GPH
Sound
<40 dB
Cord length
5.9FT
Application
5-30 Gal
Dimension
✓
Please read this manual carefully before using and follow strictly in accordance with the manual.
✓
Pleas
e fi
ll th
e fi
lter chamber with water before using, the pump cannot work without water.
✓
Clean th
e fi
lter with tank water every 1-2 weeks. Don’t use tap water, water too hot to clean th
e fi
lter.
✓
Please unplug the power before maintenance.
✓
Please mind that the temperature range for th
e fi
lter is 33.8~95
℉
.
1
×
Aquarium Filter
1
×
User manual
A.
If the appliance falls into the water, DON'T reach for it! First unplug it and then retrieve it. If electrical components of
the appliance get wet, unplug the appliance immediately.
B.
If the appliance shows any sign of abnormal water leakage, immediately unplug from the power source.
C.
Carefully examine the appliance after installation. It should not be plugged in if there is water on parts not intended
to be wet.
D.
Do not operate any appliance if it has a damaged cord or plug, or if it is malfunctioning or if it is dropped or damaged
in any manner.
DANGER:
To avoid possible electric shock, special care should be taken in the use of aquarium equipment. For each
of the following situations, do not attempt repairs yourself. Return the appliance to an authorized service facility for
service or discard the appliance.
1.
Read and follow this user manual strictly.
03
04