HYENA E-BIKE SYSTEMS
10
Mounting
Tool List
Phillips screwdriver
Cable lead wire
Accessory List
Plastic gasket
Optional depends on the frame type
3 pcs
Phillips screw
M5x0.8P (length depends on frame thickness)
3 pcs
Charging socket with cable
1 pcs
Countersunk Phillips screw
M3x0.5P
(length depends on frame thickness)
4 pcs`
Mounting Instructions
• Use the proper bicycle tools during the installation or removal process.
• Carefully install this product is necessary, do not strike it with any tool such as a hammer or wrenches.
•
CAUTION
- Please strictly follow these steps for assembly; otherwise, an incorrect assembly may cause permanent
damage.
•
NOTE
- The bike image seen in the manual may be different from the actual bike, but will be enough to help you
understand related instructions.
Battery Installation
Step 1:
Insert the battery through the bike frame.
Step 2:
Pull out the component cables and fasten the
fixation screws (with maximum torque 5Nm).
