Firmware Version 2.0
MultiSystem 4070
86
Operating software
ENG
Display (Symbols/colors) dialog
First, make a selection from the
Use symbols
dialog entry in the
Display
dialog:
•
YES
: Symbols and colors are used
•
NO
: Only colors are used
You can assign symbols and colors to the channels after making this basic
selection:
Open the
COL/SYM
dialog on the lower display bar using
.
Press
AUTO
to assign the standard settings to all channels. If a channel
is highlighted, you can use
to open and assign the selection lists for sym-
bols and colors.
1
Highlight a channel –
.
2
Select a color –
.
(only for activated symbols)
3
Select a symbol –
.
4
Repeat steps 1 to 3 for all desired channels.
5
Confirm changes and exit the dialog:
AUTO
Automatically assigns symbols and colors.
OK
Confirms input/saves changes.