background image

****** Anzeige ******

Kanäle auswählen    

MinMax aktivieren
MinMax löschen
Kontrast      :50%
Anzeigerate   :1.00s
Beleuchtung   :50%

7.4.1 Kanäle 

auswählen

Mit dieser Funktion legen Sie fest, welche Kanäle während der Messung angezeigt werden 
sollen:

Press [Menu].

[

] [

] Highlight „Display“ [Enter].

[

] [

] Highlight „Select channels“ [Enter]:

** Select channels **

C1 (p1 ) : yes

C2 (p2 ) : no
C3 (Q1 ) : yes
C4 (dp1) : yes
C1 - C4  : none

[

] [

] Highlight a channel.

Press [Enter] to toggle between „yes“ (channel will be displayed) and „no“ 
(channel will not be displayed).

Repeat steps 4. and 5. for all desired channels.

[

] [

] Highlight „C1 – C4“ and press [Enter] to toggle all channels simultane-

ously.

Press [ C ].

7.4.2 Enable 

MinMax

During measuring it is possible to display the measured minimal and maximal values of a 
channel together with the current measured value. With this function you can enable this for 
a single or all channels:

Press [Menu].

[

] [

] Highlight „Display“ [Enter].

[

] [

] Highlight „Enable MinMax“ [Enter]:

1.

2.

3.

4.

5.

6.

7.

8.

1.

2.

3.

MultiHandy 3020
Operating Instructions

16

 

Operating Instructions MultiHandy 3020 • © Hydrotechnik GmbH • All rights reserved

Summary of Contents for MultiHandy 3020

































Reviews: