START-UP OF THE SERVICE MEASURING KIT
HySense
®
CX 197
13
ENG
4.
START-UP OF THE SERVICE MEASURING KIT
Figure 3 depicts the connected CX 197. The next section describes the start-up
in more detail.
A:
Supply line (pressure connection)
D:
Connection for ventilation
B:
Connection to sensors
E:
Drain (tank connection)
C:
Connection to measurement instrument or
CAN sensors
4.1 Connection to a hydraulic system
Heed the correct sequence when connecting to a hydraulic system:
•
First connect the tank line to the CX 197 with a simple hose line (point
E
,
•
Connect the other end of this hose line to the tank line of your hydraulic
system
A
B
D
E
C
Figure 3: Connections to the CX 197