11
User Settings (Level I)
Press MENU key.
Press + or - to change menu option. Press SET to enter.
Press + or - to change value. Press SET to accept.
Filter Mode
Press SETTINGS.
Press UP or DOWN to change value.
Press SELECT to accept change and advance to next page.
CAUTION:
The values in this page are for illus-
tration purpose and can be changed
by the factory without notice.
Please contact Customer Service to
confirm proper settings.
DATE AND TIME
Time of day is for normal operation of system and the
scheduling of the regeneration time. The date is used
in a diagnostic function to track the last time the sys-
tem regenerated.
HARDNESS
This value is the maximum compensated water hard-
ness in grains per gallon of the raw water supply. It is
used to calculate the system capacity. If Ferrous Iron
is present add 4 gpg for every 1 ppm of Ferrous Iron.
MANUAL REGENERATION
To start an immediate regeneration select the Manual
Regen option.
This setting determines the time of day to perform a
scheduled regeneration.
DEALER INFORMATION
This is optional. Dealer information can be added.