Hydrotech 89 HIMTLC Series, Owner'S Manual

Page: 12 / 24

12
Programming Levels
There are 3 levels to the valve program. Master options and Factory options are typically adjusted at the fac-
tory. These options link the PCB function with the type of control valve and should not be tampered with.
Advanced options are used to configure the unit when the valve is assembled to the tank so that it can func-
tion as the proper size and intended system operation. Settings are the final options chosen when the unit is
installed to a specific location.
Button Configuration
Key Pad Configuration
MENU This func on is to enter the basic set up informa on required at the me of installa on.
SET This func on is to accept the values if changed and advance to the next page in the menu.
+ / -
These bu ons are used to increase or decrease the value of the se ngs while in the pro-
gramming mode.
Main Display Options
The main display page shows the Flow Rate, Date, Time Of Day, Remaining Volume, and Total Volume. The
display will alternate between the main page and the dealer information page.
PROGRAM LEVEL USER ACCESS
MAIN MENU (II)
These se ngs are programmed when the unit is installed. The se ngs should only be adjusted by a quali-
fi ed person.
ADVANCED MENU (II)
These se ngs are programmed by the factory and should be adjusted when the valve is assembled into a
unit or system. It contains important se ngs so the valve will operate properly for the type of system it is
intended for. The se ngs should only be changed by quali
fi ed person.
HISTORY MENU (IV)
This menu contains key diagnos cs for trouble shoo ng the system.
USER SETTINGS(I)
These se ngs are programmed when the unit is installed. The se ngs should only be adjusted by a quali-
fi ed person.
FACTORY MENU (V)
These se ngs are programmed by the factory. The se ngs are important for the opera on of the valve
Flow Rate: 24.5 GPM
18-Apr-2015 10:35AM
Remain: 1,280 GAL
Capacity: 1,500 GAL
+
-
MENU
SET