Hydro
Tab
Marine Engineering
4
15-20
cm
15-20
cm
WARNING:
DO NOT MOUNT
the Air Unit upside-down
Interceptor Installation (indirect air supply)
In case of indirect air supply, you can use the components included in the kit as shown
in the image.
Air Unit Installation
15-20 cm
1
2
Caution:
Exhaust must have proper
spacing, to ensure
correct cooling of air unit.
Drill Ø3,5
You will need
Please use the 4,8x25 screws included in the kit
Quick Installation Guide & Drilling Pattern
The air unit must be installed in a compartment free of explosive or flammable gases.
Please ensure that the air unit is installed according to the IP30 limitations.
You will need
Screwdriver
15-20 cm
1
2
3
To Interceptors
Port
Stbd
Caution:
Exhaust must have proper
spacing, to ensure
correct cooling of air unit.
Direct air supply
Direct air supply
In-Direct air supply
4
PORT
STBD
PORT
STBD
POR
T
STBD
Screwdriver
You will need
THE AIR UNIT MUST BE INSTALLED IN A COMPARTMENT
.
FREE OF EXPLOSIVE OR FLAMMABLE GASES
PLEASE INSURE THAT THE AIR UNIT IS INSTALLED ACCORDING TO THE IP30 LIMITATIONS.
