background image

WARRANTY: 

HELPFUL HINTS: 

REQUIRED TOOLS 

(NOT INCLUDED): 

Phillips screwdriver and adjustable spanner. 

ASSEMBLY INSTRUCTIONS: 

✓ 

Phillips Screwdriver 

Adjustable Spanner 

10020

5

21

9

This product is covered by the manufacturer

s one

-

year limited warranty. This 

guarantees that as of the date of purchase, the product is free of defects in 

material and workmanship. 

U

nder normal use and proper care, this product 

will remain free of defects for one year from the date of purchase. 
This warranty does not cover defects caused by improper care or use. 

Corrosion or rusting is not covered by warranty. 

N

ormal wearing of the wheels, 

leader hose, o

-

rings and seals is not covered by warranty.

Assemble in a clean, flat area. Read instructions thoroughly before assembling. 

Carefully remove all parts from the box and identify and organi

z

e parts and tools 

prior to assembly. 

When assembling, hand

-

tighten all nuts and bolts. 

O

nce the hose cart is 

fully assembled, properly tighten nuts and bolts. 

D

o not over tighten. Inflate 

the wheels with a hand pump only.

PRODUCT CARE:

D

o not use a compressor to inflate tyres. This could damage tubes and 

tyres. Always drain water before placing in storage. Store inside during 

winter to avoid frost damage. 

D

o not drink water from the hose. 

Summary of Contents for 100205219








Reviews: