HYDROSCAND AutoReel Dynamic, User Manual

Page: 4 / 16

Page 4
autoreel dYnamIc user manual 2015-11-25
2. General precautions
always make sure in advance that the minimum safety, placement and operating standards
are respected, taking note of the environmental conditions, temperature, humidity, ligh-
ting, vibrations, suspended dust and the appropriateness of the area to be occupied.
the reel is constructed to operate indoors (workshops, industries etc.) where there is no
risk of explosion or fire.
do not remove the information plates on the machine. make sure they are readable and
that you are sure about their meaning. should they deteriorate, replace them immediately
by contacting only an authorized technician.
The use of any spare parts that deviate from this manual’s specifications, any other changes/manipula -
tions (however insignificant) made to your machine releases Hydroscand Machine AB from any liability
for consequences that arise due to the machine’s performance, level of safety for nearby persons and/
or personal property.
do not combine the machine with other equipment unless you have an approval from the
manufacturer. If other equipment are installed on the machine, or if the machine is combi-
ned with other equipment it’s necessary to make a risk analysis and a ce-approval for the
whole foundation.
It is strictly forbidden to tamper with safety equipment and/or devices.
dispose of processing waste in compliance with current regulations.
note!
Any maintenance operations, except for those specifically described on the pages of this
manual, must be carride out by skilled personnel co-ordinated by authorized technician.