www.HydroOxy.com Page
9
of
39
Scraping Tool
Scraping baked on food, grime and grease. Removing residue or other
difficult substances from surfaces, such as stove tops and ovens
Garment Steamer Cloth
For use when steaming garments, draperies, tablecloths, and more.
Microfiber Pad
For general cleaning of hard floors and refreshing carpets and more.
Flexible tube*
Used to connect the large squeegee and mop body, fixing straps, and
convenient operation
Large squeegee*
Remove dirt all kinds of glass surface, water and more.
Strap*
Convenient, labor-saving and time-saving
Strap hanger*
To fix the steam button, continued to steam, and connection strap
Accessory Adaptor 2 *
A universal adapter to help connect small accessories to the flexible
tube, for more practical easy use.
*
these features are purchased as additional accessories
CLEANING AND MAINTENANCE:
BE SURE THAT THE UNIT IS DISCONNECTED FROM THE ROWER OUTLET WHEN PERFORMING CLEANING
Drain the remaining water in the tank and clean the tank after every use.
Please use detergent to clean the accessories (i.e. Jet Nozzle and Round Brush) when they are dirty then wash with cleaning water and air dry
How to decalcify the Water Tank interior
To clean calcium deposits that build up inside the Water Tank, add one or two tablespoons of white vinegar to a full Water Tank close the Water Tank Cap and then
shake the contents.
DO NOT TURN THE STEAMER ON.
Cleaning procedure to remove lime scale:
•
If your steam mop begins to produce steam more slowly than usual or stops producing steam, you may need to remove lime scale. Lime scale can
develop over time on the metal parts and greatly affect mop performance.
•
It is necessary to remove lime scale on regular basis every 25-50 times you use a full tank of water or at least once a month, especially in areas with hard
water.
•
The frequency of lime scale removal depends upon the hardness of you tap water and how often you use the steam mop.
By using cleaning solution
1.
Prepare a solution of 1/3 white vinegar and 2/3 tap water and add to the water tank.
2.
Secure and position the unit to ensure steam released is aimed away from the floor or surrounding objects and surface. Plug the unit in, turn the unit ON
by pressing the power switch, and allow the unit to produce steam unit the vinegar/water solution in used up.
3.
Repeat the above procedure as many times as necessary unit a normal steam flow rate is achieved.
4.
Fill the water tank with fresh water and rinse our.
5.
Fill the water tank with fresh water, attaches to the unit and release steam through the system unit the water tank is empty.
