Hydronix Hydro-Hub, User Manual

Page: 45 / 75

Hydro-View / Hydro-Hub User Guide HD0864 Rev 1.0.0 45
Chapter 6 Sensor Setup
1 Connecting to a Sensor
The Sensor Setup section is used to access configuration, calibration and diagnostics data from
any connected sensor.
On start up the software will automatically search for any connected sensors on the network. The
available sensors will be displayed at the top of the screen.
Figure 58: Sensors on the Network
To manually detect a sensor on the network use the search facility.
Figure 59: Manual Search
2 Sensor Configuration
The sensor configuration section is divided into four sections.
2.1
Live Values
Figure 60: Live Values Selector
The Live Values section displays the current output of the sensor. All output values are
displayed as a number and graphically.