Hydro-View User Guide HD0531 Rev 2.0.0 41
5.3
Backup/Restore
Operator
Supervisor
Engineer
Figure 21: The Third System Screen
Backup
Backs up or “Saves” the System Settings and Calibrations to a USB memory stick. Only one
System Backup can be stored on a memory stick, any previous backups will be overwritten.
Restore
Restores the System Settings and Calibrations from a USB memory stick. This can be used to
recover a Hydro-View that has had its settings changed, or to copy the settings from one unit
to another. All settings are overwritten in the unit, and cannot be recovered after a Restore
operation.
6 Sensor Screens
Operator
Supervisor
Engineer
The Sensor Screens enable the configuration and diagnosis of any attached sensor.
When the Sensor button on the Main Menu is touched, a list of the connected sensors appears
(only if more than one is connected). Select the required sensor to access the Sensor Setup
screens (Figure 22).
Figure 22: Sensor Setup Screens
Summary of Contents for HV04
