2.2.1
Installing using the Mounting Collar
Drill a 25mm diameter hole in the mounting surface and
weld the Mounting Collar centrally over it. The Thermo-
Tuff is retained by tightening two bolts on to the long flat
areas of the sensor.
To remove the sensor, loosen the screws and withdraw
from the Mounting Collar. A spanner can be used on the
two flat areas of the sensor to ease extraction of the
sensor from the Mounting Collar.
When flush mounted, it is important to adjust the position
of the sensor periodically so that the sensing face
remains flush with the mounting surface and does not
become damaged by any moving parts within the system.
This will also prevent the build up of material around the
sensor.
2.2.2
Installing using the Extension Mounting Sleeve and Collar
When mounting in a bin or hopper, the Extension
Mounting Collar is welded into a 43mm diameter
hole. The sensor should be installed into the
Extension Mounting Sleeve so that it is flush with
the end of the sleeve. It is retained with two grub
screws. The Sleeve is then fitted in the Mounting
Collar and the retaining bolts used to secure the
assembly.
3
Electrical Installation
3.1
Power
The Thermo-Tuff is designed to be powered by the 4-20mA current loop. It does not have connections for an
external power supply.
3.2
Analogue Output
The Thermo-Tuff outputs a continuous 4-20mA signal and this is scaled to read between 0 and 80°C as shown:
Temperature in °C = (I
o
- 4) x 5
Where I
o
is the output current in mA.
Current Output
Temperature
4mA
0 °C
32 °F
20mA
80 °C
176 °F
Mounting
Surface
Ø25mm
Hole
Weld
2x
retaining
bolts at
90°
Flats to
ease
removal
3-40mm
Ø43mm
Hole
50mm
220mm
Extension Mounting
Collar
Extension Mounting Sleeve
150mm
Max
Holes for inserting an extension
bar to ease removal
Weld
2x Retaining
Bolts @ 90°
0
10
20
30
40
50
60
70
80
90
0
5
10
15
20
Current Output (m A)
T
em
p
er
at
u
re (
°C
)
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]
