manualshive.com logo in svg

Hydronix HD0333, User Manual

Share
Download
Hydronix HD0333 User Manual Download Page 19

 

 

19 

Ethernet Adapter User Guide 

HD0333 Issue 2.0.0 

Chapter 4 

Configuring the Ethernet Adapter 

Ethernet Adapter defaults 

By default, the Ethernet Adapter will use an automatically generated IP Address, which will be allocated 
by the network DHCP server. As this may change after a few days or weeks, it is recommended that a 
fixed IP Address is used for the Ethernet Adapter. The allocated address should be on the same subnet 
as the address allocated by DHCP, but outside the range of DHCP addresses. Contact the Network 
Administrator to find a suitable address. 

Finding an Ethernet Adapter automatically 

Communication with Hydronix sensors is carried out with the Hydro-Com Utility. To start go to the 
Communications->TCP/IP menu in Hydro-Com and select “Search for Ethernet Adapters”. 

 

The program will display a search window and query the network for any sensors attached. 

 

The adapter will be added to the list, select it to connect. 

 

Summary of Contents for HD0333






























Reviews:

No comments

Brands by name

Popular brands

Load more brands