Configuring the Ethernet Adapter
Chapter 4
28
Hydronix Ethernet Adapter User Guide HD0333 Rev 2.1.0
The port 7011 on the Firewall is opened up and all traffic to this port is forwarded to
192.168.10.61 port 10001.
If the Firewall does not allow a completely flexible configuration of port forwarding then either
open up port 10001 on the Firewall and leave the Ethernet Adapter port set as 10001, or
alternatively alter the port of the Ethernet Adapter to be the same
as the port opened in the Firewall. This is done by entering the new
value in the Port Number box when setting the fixed IP Address:
Certain port numbers are reserved for internal use by the Ethernet
Adapter and should not be used:
Port Number
Function
1 – 1024
Commonly used Internet Ports
9999
Ethernet Adapter Reserved
functionality
14000 – 14009
30704
30718
Hydro-Com prevents you from setting these port numbers.
Install Hydro-Com on the remote machine. As before, select Communications->TCP/IP->Add
Ethernet Adapter. In the Add Ethernet Adapter window, enter the IP Address of the Firewall and
the Port opened.
Summary of Contents for Ethernet Adapter
