Hydronic Air Driven Pumps & Intensifiers
P720 Installation, Use and Maintenance Booklet 08-21-09
Page 4
Storage
If the pump is to be kept out of use for a long period, clean the pump in general and
drain the oil from the tank. Cover the pump and store it in a dry, well-protected place. It
is advisable to wrap the pump in a plastic film. To put back into service, check all parts,
fill tank with oil and try the pump out to ensure that it working properly.
This operation
must be carried out by qualified personnel
.
Disposal
If the pump is to be scrapped, treat as a special type of waste. Dismantle it and divide it
into materials of the same type and dispose of them in accordance with the local laws
and regulations in your state.
Description of the standard pump components
A
Air inlet 1/8” NPT
B
Oil Filler/Breather
C1
Release Pressure Setting
D
Exhaust Filter
E
Oil outlet ¼” NPT
F
Additional Oil Return Port
G
Oil level sight glass
H
Air Pilot 1/8” NPT
Oil suction 3/8” NPT