background image

1

MODEL OS-200

Wireless 

Outdoor Sensor

for

    Model  3200-

Plus

 

Model 3250-

Plus

 

Fuel Smart HydroStat Controls 

Model 4200 HydroStat-IC 

HydroStat Control

Installation Instructions 

and Operating Manual

• Low Transmitter battery status indicator 

on the Receiver

• Power and communication indicator lights
• Transmitter temperature range of -40°F 

to 140°F (-40°C to 60°C)

• Long battery life (minimum 10 years) 

with included 1.5V lithium AA batteries

• 5000 ft. (1500 m) open range
• 8 walls / 250 ft. (75 m) indoor range
• Transmits outdoor temperature every 10 

minutes

    

WARNING

   

Electrical shock hazard. 

To prevent electrical shock, death or equipment 

damage, disconnect power supply before installing or servicing control. 

Only qualified personnel may install or service this control in accordance with local codes and ordinances. Read 

instructions completely before proceeding.

    

CAUTION

     

   

To prevent serious burns, boiler should be thoroughly cooled before installing 

or servicing control.

    

WARNING

   

Frozen pipes/water damage. 

Central heating systems are prone to       

shut down as a result of power or fuel outages, safety related fault 

conditions or equipment failure. Installation of freeze protection monitoring or other precautions is recommended 

for unattended dwellings in climates subject to sustain below-freezing temperatures.

126 Bailey Road • North Haven, CT 06473 • (203) 776-0473 • FAX (203) 764-1711  
www.hydrolevel.com

The Hydrolevel Wireless 
Outdoor Sensor OS-200 
provides outdoor temperature 
measurement in any 
application without exterior 
wiring. The 

transmitter and 

receiver are sold pre-linked 
and are installation-ready. 
With exceptional range and 
a 10-year battery life, the 
Wireless Outdoor Sensor 
OS-200 provides maximum 
accuracy, convenience and 
reliability.

Wireless Outdoor Sensor 087

Receiver

Communication

Power

Low Battery

Link

TRANSMITTER

(OUTDOOR)

RECEIVER

Summary of Contents for OS-200













Reviews: