2
I N S TA L L AT I O N O F
R E M O T E M O U N T E D M O D E L S O N LY
A.
To secure mounting plate to boiler jacket,* pre-drill two 3/32" pilot holes using the mounting plate as a template. Secure plate
with sheet metal screws provided. Attach control to mounting plate by slipping keyholes in back of chassis over pre-mounted
screws on plate. Tighten screws.
B.
Using a wire nut, attach a wire (min 90°C) to the pigtail lead in the control box. Attach the other end to the probe terminal in
the remote probe housing. Attach a second wire between the ground screw on the control chassis and one of the four screws in
the remote probe housing. Note: Wires and wire nuts not provided.
*Or other suitable surface
B
A
